F1

Show Quick Help.

F4

Compact or Expand Grid. Compact Grid reduces the height of inactive rows.

F8

Program info. Enter Serial Number here.

ALT-F4

Close a Window

Following commands must be preceded by a clock number and some command must be committed by pressing Enter!

G

The command 1g (Go Clock 1) starts Clock 1. The regular plan will be applied. See MTimer.ini

R

The command 1r (Restart Clock 1) reactivates Clock 1, if the clock was halted beforehand. The duration of the pause will be shown and deducted from the total.

V

The command 2v applies the VIP plan to clock 2. Clock 2 must be running!

H

The command 1h (Hold Clock 1) stops clock 1. The clock can be reactivated with G or R.

U

The command 1u (Undo Hold Clock 1) will void the last halt. This command is usable, when the clock was stopped be mistake. See also G and R.

C

The command 1c (Clear Clock 1) will clear a stopped clock and moving add an entry to the history.

Q

The command 2q (Quick Start Clock 2) stops (if running), clears (if uncleared) and starts the addressed clock. If applicable, the old total will be shown in the message area until the next command is entered.

Following command have to be committed by pressing Enter!

X

The command 1x2 (Exchange) swaps clock 1 and 2. People like to switch.

A

The command 4a33 restores history entry 33 to clock 4.

-

The command 1-5 gives 5 Minutes Refund to Clock 1. Repeating this command will overwrite an old refund.

+

The command 1+5 sets clock 1 back 5 minutes. May be, you forgot to start the timer.

M

The command 1mX sets clock 1's Message to X (appends to old message!). May be a reminder to charge something else. To reset message enter just 0m.

P

The command 1p3 sets clock 1's price to 3 (will be shown next to calculated price in history). The command 1p removes the manually set price from Clock 1

N

The command 0n creates a new Prepaid Card ID. The ID will be shown in the message area (note it down on the card). The regular pre-paid plan will be applied. See MTimer.ini. The just created Prepaid card ID can be started with the command 3n (clock 3 presumed) or at a later time with 3nX (X=Card ID). When a Prepaid Card is used, Card-ID and remaining assets will be displayed. On overflow, the price will be incremented with the same per minute rate. The command 0n10.15 acts the same way, but sets the card face value to 10 and the rate 15 cents / minute.

Prepaid Cards are stored in the folders OpenedPrePaid, ClosedPrePaid and ExpiredPrePaid. Expiration is controlled thru DaysOfValidity (default 90 days) in the files MTimers.user.

S

The command 0s is equal to 0n10.12.

T

The command 0t displays the accumulated total since the program invocation.

L

The command 0l shows the history in a grid. The command 0lX shows the history of Prepaid card ID X and the command 1l shows the history of the Prepaid Card currently in clock 1.